Panasonic CF-31UEU70DY Operating Instructions Manual page 17

NOTE
l PC Information Viewer
This computer periodically records the management information of the hard disk, etc. The maximum data volume for each
record is 1024 bytes.
This information is only used for estimating the cause in the case when the hard disk goes down by any possibility. They
are never sent to outside via network nor used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information history]
in [Hard Disk Status] of PC Information Viewer, and click [OK].
(è Reference Manual "Checking the Computer's Usage Status")
n Precaution against Starting Up/Shutting Down
l Do not do the following
Ÿ Connecting or disconnecting the AC adaptor
Ÿ Sliding the power switch
Ÿ Touching the keyboard, touch pad, touchscreen (only for model with touchscreen), or external mouse
Ÿ Closing the display
Ÿ Turn on/off the wireless switch
NOTE
l To conserve power, the following power saving methods are set at the time of purchase.
Ÿ The screen automatically turns off after 10 minutes of inactivity.
Ÿ The computer automatically enters sleep
*2
Refer to Reference Manual "Sleep and Hibernation Functions" about resuming from sleep.
l Use standard characters as a computer name: numbers 0 through 9, uppercase and
lowercase letters from A to Z, and the hyphen (-) character.
If the error message "The computer name is not valid" appears, check if characters
other than the above are not entered. If the error message still remains on the display,
set the key entry mode to English ("EN") and enter characters.
<For MUI OS model>
l When setting up the keyboard, choose the appropriate one to your computer.
Otherwise, input by the keyboard may become unavailable.
8 <Only for model with touchscreen>
Perform the touchscreen calibration.
l Before performing the calibration, close Tablet PC Input Panel.
n Calibration by an administrator
NOTE
l At first, log on to Windows as an administrator, and perform this calibration.
A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set-
ting].
B Click [Calibrate].
C Using the stylus, touch each of the "+" target marks one by one, and then
click [Yes].
D Click [OK].
n Calibration by a standard user
NOTE
l Perform the following calibration for each user.
A Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set-
ting].
B Click [Calibrate].
C Using the stylus, touch each of the "+" target marks one by one, and then
click [Yes].
D Click [OK].
l Perform the calibration for the orientation to be used.
*2
after 20 minutes of inactivity.
17