Panasonic CF-31UEU70DY Operating Instructions Manual page 16

First-time Operation
16
Ÿ Sliding the power switch
Ÿ Touching the keyboard, touch pad or touchscreen (only for model with touchscreen)
Ÿ Closing the display
Ÿ Turn on/off the wireless switch
l When the CPU temperature is high, the computer may not start up to prevent
overheating of the CPU. Wait until the computer cools down, and then turn the
power on again. If the computer does not power on even after cooling down,
contact Panasonic Technical Support.
l Any changes from the default setting of the Setup Utility must not be made until
the First-time Operation is completed.
6 <For MUI OS model>
Select language and OS (32-bit or 64-bit).
NOTE
l The message "Reinstall" is displayed, but language and OS (32-bit or 64-bit) will
be prepared by the following steps.
A Click [Reinstall Windows] and click [Next].
The License Agreement screen appears.
B Click [Yes, I agree to the provisions above and wish to continue!] and click
[Next].
C Click [Reinstall Windows to the whole Hard Disk to factory default.] and click
[Next].
D At the confirmation message, click [YES].
E Select language and OS (32bit or 64bit) on "Select OS" screen and click [OK].
The language setting will start by clicking [OK] on the confirmation screen.
You can return to the "Select OS" screen by clicking [Cancel].
The language and OS setting will be completed in about 15 minutes.
F When termination screen is displayed, click [OK] to turn off the computer.
G Turn on the computer.
CAUTION
l Carefully choose your language because you cannot change it later. If you set a
wrong language, you need to reinstall Windows.
7 Setup Windows.
Follow the on-screen instructions.
l The computer restarts several times. Do not touch the keyboard or touch
pad, and wait until the hard disk drive indicator
l After the computer is turned on, the screen remains black or unchanged for
a while. This is not a malfunction. Wait for a moment until the Windows setup
screen appears.
l During setup of Windows, use the touch pad and clicking to move the cursor
and to click an item.
l Setup of Windows will take approximately 20 minutes.
Go to the next step, confirming each message on the display.
l "Join a wireless network" screen may not appear.
You can set the Wireless Network after the setup of Windows is complete.
CAUTION
l You can change the user name, password, image and security setting after
setup of Windows.
l Remember your password. If you forget the password, you cannot use the Win-
dows. Creating a password reset disk beforehand is recommended.
l Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,
COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (ac-
count name) that includes the "@" mark, a password will be requested at the
log-on screen, even if no password has been set. If you try to log on without en-
tering a password, "The user name or password is incorrect." may be displayed
and you will not be able to log on to Windows (è page 25).
has turned off.