Help; Sms Utility - Ericsson F5521gw User Manual

If the operator settings are not available or a personalized (company-specific)
APN is used, the information may be entered manually. Any number of profiles
may be defined (including Access Point Name, Username and Password).
Quality of Service parameters are set to "network default".
5.2.2.2 Connection Operation
No user interaction is required to set the speed of the connection. It will be
automatically set by the network depending on available network resources,
the user's subscription and the need amount of buffered data.
F5521gw will automatically use the UMTS network by preference and
automatically switch over to GPRS/EDGE where the operator has an
integrated UMTS/GSM network if UMTS coverage is not available. When
UMTS coverage returns, the connection will return to the UMTS network. In
some networks, data flow must be paused. F5521gw therefore needs to return
to an idle state before a return to UMTS can take place. This is network-
specific.
Similarly, if HSPA is available in the UMTS network, the higher download
speeds will be automatically available. In some networks, it is not possible to
detect that HSPA is available until a connection is made.
5.2.2.3 IP Number Allocation
F5521gw enables you to work within your corporate and/or ISP-assigned IP
numbering scheme. Dynamic IP allocation is supported, which is normally
used by both ISPs and corporate networks.
5.2.3

Help

The Wireless Manager has a built in help function. The help window is started
by clicking on the help in the main window, or by pressing function key F1.
5.3

SMS Utility

Text messages can be sent and received with the SMS Utility. Concatenation
is supported, so messages longer than 160 characters (dependent on
character coding) can be sent and received. The phonebook is an integrated
part of the application and messages can be sent from a phonebook contact.
1/1553-KRD 131 18 Uen Rev PE1 2011-08-18
© Ericsson AB 2008-2009
Ericsson Confidential
User Guide F5521gw
17 (22)