Dimensions - Ericsson F5521gw User Manual

4.2

Dimensions

The dimensions of the card are given in the figure below. All measurements
are in millimeters and the tolerances are +/- 0.1 if nothing else is stated. The
mini card is a type F2 and is designed to fit into a full-size Mini card slot or into
two half-size Mini card slots. See the PCI Express Mini Card Electro
Mechanical specification for more details.
There are three connectors located on the card: two RF connectors located in
the top corners and one system connector located on the lower edge.
The RF connectors are of type U.FL. The Main connector is used for
UMTS/GSM transmission and reception. The AUX connector is used for
UMTS diversity and GPS.
The System connector is a straight single 52-pin connector, 26 pins on each
side of the card. The connector is specified in the PCI Express Mini Card
specification.
1/1553-KRD 131 18 Uen Rev PE1 2011-08-18
© Ericsson AB 2008-2009
Ericsson Confidential
User Guide F5521gw
12 (22)