Connecting Usb Keyboards, Mice And Other Devices - FlipStart E-1001S User Manual

Changing settings for your external Bluetooth devices
For more detailed information on configuring an external Bluetooth device, see the User's
Guide or help files that came with that device.
 To change external Bluetooth device settings:
For Windows XP users:
Click Start | Control Panel | Printers and Other Hardware | Bluetooth Devices.
1
2 Select the icon of the Bluetooth device you want to configure, and click Properties.
3 In the Properties window, click the Services tab to see a list of available services for that device.
Select the check boxes of the options you want to make available and clear the ones you do
not want to be available.
4 Click OK, and then OK again.
For Windows Vista users:
For Windows Vista users, click Start | Control Panel | Network and Internet | Bluetooth Devices.
1
2 On the Devices tab, select the icon of the Bluetooth device you want to configure, and click
Properties.
3 In the Properties window, click the Services tab to see a list of available services for that device.
Select the check boxes of the options you want to make available and clear the ones you do
not want to be available.
4 Click OK, and then OK again.
Note: Many Bluetooth configuration options can be quickly selected by right clicking on the
Bluetooth icon in the system tray, and then selecting an option.
For more information, on troubleshooting Bluetooth wireless technology connection problems,
see Solving problems with Bluetooth (on page 73).

Connecting USB keyboards, mice and other devices

The FlipStart main unit has one built-in USB 2.0 port on the rear, and the FlipStart port
replicator provides two USB 2.0 ports. In addition, you can connect USB hubs to connect as
many devices as needed.
Note: Some USB devices draw power from your FlipStart. Be aware that using some USB
devices while your FlipStart is running on battery power can greatly reduce the amount of time
the battery charge will last. Also, some USB devices might function only if they are using their
own power supply.
Connecting USB devices such as keyboard, mice, cameras, and disk drives to your FlipStart
requires little or no configuration. Many USB devices can be connected and disconnected while
Windows is running.
Using your FlipStart 64
.