What To Do If You Have Problems With Flipstart Infopane; What To Do If Flipstart Software Is Not Working Properly - FlipStart E-1001S User Manual

Suggested troubleshooting steps:

Make sure the two devices are still paired.
 Check that the external device is in range of the FlipStart. Some connection problems
can be caused by the Bluetooth devices being too far away from each other. Refer to
your device's user manual for recommended operating distances.
Problem: My touchstick or touchpad is not working correctly.
Suggested troubleshooting steps:
 Use your finger as the pointing device for the touchpad, not a sharp pointing device like
a pencil. Sharp objects can damage the touchpad.
 Inspect your touchpad closely to ensure no crumbs, particles, or oil smears are marring
the surface. Clean the input device with a damp, soft cloth, if necessary.
Problem: The Jog Dial on the side of my FlipStart is not working correctly.
Suggested troubleshooting steps:
 Inspect your Jog Dial closely to ensure no crumbs, particles, or oil smears are marring
the surface. Clean the Jog Dial with a damp, soft cloth, if necessary.

What to do if you have problems with FlipStart InfoPane

Problem: When I close my FlipStart, the InfoPane does not turn on.
Suggested troubleshooting steps:
 Press the Jog Dial in to activate the InfoPane screen.
 Make sure you have closed your FlipStart completely.
 Verify that InfoPane is enabled in the Control Center. For more information, see InfoPane
options in Control Center Help.
 Try restarting your FlipStart.

What to do if FlipStart software is not working properly

Problem: I am having problems using FlipStart Navigator, FlipStart Control Center, or FlipStart
Zoom.
Solving problems 76
.