Table of Contents
Advertisement
2 Enable a sync interval using FlipStart Control Center. (Navigate to InfoPane > Change
InfoPane/Windows sync intervals, and make a selection.)
3 Ensure that the default behavior for putting Windows in Standby mode when the lid is
closed is enabled in FlipStart Control Center. (Navigate to InfoPane > Turn on/off Windows standby
mode).
4 Ensure that you have set up a wired or wireless network connection and that the network
device is available (for example, that the Wi-Fi radio is switched on).
Note: You must be within range of a network for InfoPane to be able to retrieve new e-mail
messages while the lid is closed.
5 Ensure that Microsoft Office Outlook is running and connected when you close the lid.
Using your FlipStart
48
.
Advertisement
Table of Contents
