Admin Page - L3 Nova Engineering NovaRoam MH902 User Manual

The MAC Filter Tab can be used to view the list of MAC addresses that have been added to the MAC
Address Revocation list using the NovaRoam Security Utility. There are no configurable parameters on
the MAC Filter Tab. All changes to the MAC Revocation list must be made using the NovaRoam Security
Utility and uploaded to the NovaRoam as part of a new security configuration file.

Admin Page

The Admin Page provides a list of tabs that can be used to perform administrative tasks to the NovaRoam
including upgrading firmware and determining system information. Selecting a tab will provide a list of
configurable options.
System Tab
The System Tab is used to view system information, such as the current firmware version. System
information including radio ID and location can be entered by the administrator. The following parameters
can be viewed or configured:
•
Build Date. This read-only field provides information regarding the date that the current
NovaRoam firmware was created.
•
MIB_Version. This read-only field provides information regarding the current Management
Information Base (MIB) that is being used by the SNMP protocol.
•
Firmware_Version. This read-only field displays the current firmware version that is installed on
the NovaRoam
•
Running Time. This read-only field displays the elapsed time since the last time the NovaRoam
was rebooted.
•
NovaRoam ID. This field can be used by Administrators to assign a descriptive name to the
NovaRoam. The NovaRoam ID must consist of ASCII values but cannot contain spaces or the
following characters: "$", "^", "&", "(", or ")".
•
System Name. This field can be used by Administrators to assign a descriptive name to the
entire network. The System ID must consist of ASCII values.
•
System Location. This field can be used by Administrators to note the location of the network.
The System ID must consist of ASCII values.
•
System Contact. This field can be used by Administrators to list the point of contact for the
NovaRoam network. The System ID must consist of ASCII values.
•
Apply. Saves changes made to the configuration of the System Tab. Changes will not be saved
if you change to a different configuration tab without first pressing the apply button.
•
Reboot. Pressing the Reboot button will cause the NovaRoam to reboot.