Operation Details - bem wireless party block User Manual

Step 2: Connect it (continued)
Next time the Party Block and connected device will pair
automatically. After completing this step you are ready to start
playing audio from your connected device.
Holding the Play/Pause button for 5 seconds will disconnect the
connected device and enter pairing mode for pairing a
new device.
Direct Connection
The Party Block can also be connected to any device that has a
headphone jack or line out using the included aux cable.
Please note the play/pause button only operates when
connected via Bluetooth

Operation Details

Power on / Power off
Sender: Press the power button to turn on the Sender of Party
Block. The Bluetooth© indicator will light up to signify the unit is
on and ready to be paired. Press the power button again to turn
off the base and the Bluetooth indicator light will go out.
Satellite Speakers: Press the power button to turn the speaker
on. The Indicator on the speaker will light up to signify the unit is
on. Press the power button again to turn off the speaker and the
Indicator will also go out.
Please note, always make sure to first turn on the sender unit
before turning on the speaker.
6
.
©