Getting Started - bem wireless party block User Manual

Getting Started

We know you are excited to experience your new Party Block.
These two easy steps will get you up and running quickly.
Step 1: Power It
• Connect your Party Block to an outlet using the included
5V,2A power adapter. It will start charging the Sender. The
power indicator will slowly flash during charging and goes out
when it has reached a complete charge (Approx. 3.5 hours).
• Connect the Satellite Speaker to an outlet using the included
12V,2A power adapter. The power indicator on speaker
will slowly flash during charging and goes out when it has
reached a complete charge (Approx. 4 hours).
Step 2: Connect it
There are two options for connecting to your Party Block —
wirelessly by Bluetooth© or wired using the included aux cable.
Connect Wirelessly
Turn on the power of the Sender followed by powering on each
of the 2 satellite speakers. Once the base is powered on the
Bluetooth indicator will light and a tone confirming that the unit
©
is currently in paring mode will sound.
Go to the Bluetooth
computer to find the device named "Party Block". A tone will
sound to confirm the device has paired successfully.
© settings on your mobile phone, tablet or
5