Daikin EKHH2E200AAV3 Installation And User Manual page 31

Parameter description
Work set change block
Delay in equipment start-up
Delay as from last ON
Delay as from last OFF
Minimum ON time
Number of compressor operating hours
required for maintenance
Delay air temperature sample taking for cold
evaporator test
Minimum delay between fan start-up and
compressor activation for incoming air
temperature check
Timeout solar thermal cycle
Delay for damaged fan check
Type of defrosting
Evaporator temperature to conclude defrosting
procedure (only if P4=1)
Maximum duration of defrosting procedure
Automatic defrosting start threshold
(evaporator temperature)
Minimum compressor start up time to start
defrosting procedure
Minimum level probe alarm
(only AL1 warning)
Minimum alarm set (only AL1 warning)
Type of minimum level alarm delay
(only AL1 warning)
Maximum level probe alarm (only AH warning)
Maximum alarm set(only AH warning)
Type of maximum level alarm delay
(only AH warning)
Minimum level AL1 alarm delay due to
equipment start-up (only warning)
AL1 and AH temperature alarm delays
(only warning)
Installation and user manual
Code U.M. Min
r5 ---- 0
C0 min 0
C1 min 0
C2 min 0
C3 sec 0
C10 h 0
C11 min 0
C12 min 0
C13 min 0
C14 min -1
d1 ---- 0
d2 °C/°F -50.0
d3 min 0
d17 °C/°F -50.0
d18 min 0
A0 ---- 0
A1 °C/°F 0.0
A2 ---- 0
A3 ---- 0
A4 °C/°F 0.0
A5 ---- 0
A6 min 0
A7 min 0
Max Default Notes
1 = It is not possible to
1 0 change the set point; it can
only be seen
240 5
240 5
Compressor protections
240 5
240 0
9999 1000 0 = Function excluded
999 120
240 1
240 20
240 20 -1 = disabled function
0 = With heating element
1 = With hot gas
2 1
2 = With compressor
stopped
50.0 3.0
99 8
50.0 -2.0
240 60
0 = Upper probe
2 0 1 = Lower probe
2 = Evaporator probe
50.0 10.0
0 = Disabled
1 0
1 = Absolute
0 = Upper probe
2 0 1 = Lower probe
2 = Evaporator probe
199.0 90.0
0 = Disabled
1 0
1 = Absolute
240 120
240 15
Page 31