Bosch GWH-635-ES User Manual page 6

Using the Remote Control
The rotating digit shows that the
electronics is expecting a registration.
B Hold remote control in front of the
control panel on the heater and
press simultaneously remote control
buttons
temperature indication is shown on
the remote control LCD.
B Switch ON/OFF switch to "OFF"
position (0) and then back on (I).
B Press buttons
order to
temperature.
New remote control is programmed.
4.4 Hot Water Temperature
Adjustment by Remote
Control
B Press the buttons
the remote control (Fig. 6, pos. 2)
until the required
appears on the remote control
display (Fig. 6, pos. 1).
B When the required temperature is
defined, turn on the hot water tap.
B The required temperature will flash
on the remote control display.
B The flashing will stop when the
required temperature is reached
6
and until the
and
reach requested
or
temperature
(tolerance from selected set point -5
+ 3 °K).
in
Fig. 6
4.5 "Program" Button on the
Remote Control
Memorizing
temperature
control "Program" button
on
B Press the buttons
the remote control (Fig. 7, pos. 2), )
until the
appears on the remote control
display (Fig. 7, pos. 1).
B You will now be able to memorize
this temperature by keeping the
"Program" button on the remote
Temperature adjustment
the
with the
required temperature
6 720 606 990
water
remote
or on