Maintenance - Bosch GWH-635-ES User Manual

indicated by an error code that will
appear on the display (Fig. 2, pos. 1)
and by a symbol indicating a "safety
block" (Fig. 2, pos. 7). The device will
be operative once again following the
elimination of the fault and after
pressing the reset button.
To identify the type of anomaly, consult
chapter 5 of the installation manual.
5

Maintenance

5.1 Replacing batteries
When batteries are flat, the symbol
(Fig. 2, pos. 5) will appear on the
display.
B Remove the two screws on the back
of the remote control.
B Open the battery housing and
remove the flat batteries, then
replace with new batteries, ensuring
they are inserted correctly.
Certify that the rubber
i
seal is correctly fitted
between both plastic
housing parts.
B Close the battery housing using the
two screws.
6 720 606 990
Warning:
teries
replaced.
Consequently,
manufacturer is not
liable for any faults or
damage caused by
flat batteries.
Do not create litter
with
ensure
disposed of in the
specific refuse con-
tainers.
5.2 Cleaning
Use a damp cloth to clean parts of the
remote control. No abrasive or solvent-
based detergents are needed.
Maintenance
flat bat-
must be
the
flat batteries:
they are
9