Panasonic DMR-BCT765 Operating Instructions Manual page 33

2 encrypted programmes simultaneous
recording/viewing/playing
Two programmes (e.g., "A" and "B") which need
the same CI module for decryption will be
recorded/viewed/played as follows:
When "Automatic" is selected
Programme
While recording
programme "A", start
recording programme
"B".
While viewing/playing
programme "A", start
timer recording
programme "B".
While recording
programme "A",
view/play programme
"B".
When you start viewing/playing programme
§2
"B", the decrypted recording of programme "A"
switches to encrypted recording. You need to
decrypt programme "A" to play it.
When "Decrypt Recording" is selected
Programme
While recording
programme "A", start
recording programme
"B".
While viewing/playing
programme "A", start
timer recording
programme "B".
While recording
programme "A", view/play
programme "B".
"A" "B"
Record Record
(Decrypted) (Encrypted)
Viewing/
Record
playing
(Encrypted)
possible
Viewing/
Record
playing
(Encrypted
)
§2
possible
"A" "B"
Record
Recording
impossible
(Decrypted)
Viewing/
Record
playing
(Decrypted)
impossible
Viewing/
Record
playing
(Decrypted)
impossible
Encrypted programmes
Programmes recorded in encrypted form (
have the following restrictions:
- The encrypted programme can be played back,
but it does not mean that it is decrypted and
saved in the decrypted form.
- Depending on the programme, it may not be
possible to play back/decrypt after recording.
- There are restrictions on the playback and
editing of encrypted programmes.
- To copy an encrypted programme, decryption
must be performed.
Decryption
Decryption is performed when the unit is turned
off. It will take about the same time as the
recorded duration.
"COPY" on the front panel display remains lighted
during decryption.
It is also possible to decrypt manually
Refer to "Programme Decryption". (
• To decrypt, insert the CI module into the CI slot (
decryption, do not remove the CI module from this unit.
• The programme before decryption will be deleted once
decryption is completed.
• When the HDD does not have enough remaining space,
decryption will not start.
• This function is stopped when this unit is turned on.
Decryption will start from the beginning again once the unit
is turned off.
• When a decryption fails,
- decrypt the programme manually. (
- if the screen icon changes from "
programme is copy protected by the CI Plus CAM. Editing
of the programme is not possible except for deletion.
When you encounter this problem, delete the
programme.
)
57)
9). During
57)
" to " ", the
33
TQBS0024