Panasonic DMR-BCT765 Operating Instructions Manual page 31

To change the recording mode (picture
quality)
This unit can record programmes in DR mode and
then automatically change their recording mode
(picture quality) to another setting while in
standby mode.
1 Press [OPTION].
2 Select "Recording Mode".
3 Select the recording mode (picture quality),
then press [OK].
• Recording mode (Picture Quality) (
Recording Mode ( Picture Quality )
HDD Remain h
High
Definition
Standard
Definition
• The recording mode (picture quality) set
here is used as the default value for the
next recording.
To change the recording mode (picture
quality) after recording in DR mode (
"Picture Quality Change")
To check to see if the recording mode (picture
quality) change is finished (
To cancel the recording mode (picture quality)
change ( 56)
• Programmes in the original picture quality (DR mode) will
be deleted after their recording mode (picture quality) is
changed.
• It takes about the same amount of time as recording to
change the recording mode (picture quality).
• When the HDD does not have enough remaining space, the
recording mode (picture quality) change function does not
operate.
• A recording mode (picture quality) change stops when this
unit is turned on. The process will start from the beginning
again after the unit is switched to standby mode.
• Even if you change the recording mode (picture quality) of a
programme, its audio and subtitle settings will remain the
same as those at the start of recording.
• When the recording mode (picture quality) of a programme
recorded in DR mode is changed, teletext recorded with the
programme will be lost.
23)
m (DR)
DR(Original)
HG
HX
HE
HL
HM
XP
SP
LP
OK
RETURN
56,
57)
Operation during Recording
To check the recording programme
Press [STATUS ].
e.g., While recording two programmes simultaneously
HDD
Recording programme
REC1/OTR AUTO
displayed on the TV
5 REC2
Recording programme not displayed on the TV
To stop recording
Press [∫].
When recording one programme:
If the following screen appears
Stop Recording
1
Recording of this programme is in progress.
Stop this recording ?
Yes
Select "Yes", then press [OK].
When recording two programmes:
Following screen appears
Stop Recording
2 recordings are in progress.
Which recording would you like to stop ?
1
2
1 Select the programme, then press [OK].
2 Select "Yes", then press [OK].
No
OK
RETURN
OK
RETURN
31
TQBS0024