Wheel And Wheel Trim Care; Exterior Bulbs - Dodge Challenger 2009 Owner's Manual

Hide thumbs Also See for Challenger 2009:
Table of Contents

Advertisement

MAINTAINING YOUR VEHICLE

WHEEL AND WHEEL TRIM CARE

• All wheels and wheel trim, especially aluminum and chrome plated wheels, should be
cleaned regularly with a mild soap and water to prevent corrosion.
• To remove heavy soil and/or excessive brake dust, use MOPAR
equivalent or select a non-abrasive, non-acidic cleaner.
Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Do not use
oven cleaner. These products may damage the wheel's protective finish. Avoid
automatic car washes that use acidic solutions or harsh brushes that may damage the
wheel's protective finish. Only MOPAR

EXTERIOR BULBS

LIGHT BULBS – Exterior
Backup, Tail, Stop, Turn Lamp
Center High-Mounted Stop Lamp (CHMSL)
Fog Lamp – If Equipped
Front Park/Turn Signal
Front Side Marker
Headlamp – High Intensity Discharge (HID)
Headlamp – Low Beam
Headlamp – High Beam
License Lamp
* CHMSL is not serviceable. It is a LED lamp. To replace the LED, the entire CHMSL
assembly must be replaced.
** The headlamps are a type of high-voltage discharge tube. High voltage can remain in
the circuit even with the headlamp switch off and the key removed. Because of this, you
should not attempt to service a headlamp bulb yourself. If a headlamp bulb fails, take
your vehicle to an authorized dealer for service.
CAUTION!
®
Wheel Cleaner or equivalent is recommended.
Bulb Number
3057
LED (*)
PSX24W (Serviced at Authorized Dealer)
3157AK
W5W
Service at Authorized Dealer (**)
9006
9005
168
70
®
Wheel Cleaner or

Advertisement

Table of Contents
loading

Table of Contents