2. Software Resources
We use EasyPrint 3D as the printing and control software by default. Please click on
here
to download.
After your downloading, it is convenient to install this software by following the
guidance.
3. USB Driver
Connect the printer to your computer (Windows 7) with USB cable, the motherboard
driver installer will automatically appear and your OS will complete the overall installation
process. After the installation, please find the corresponding COM port in the Windows
"Device Manager".
4. Introduction to the Menu of the Touch Screen
4.1 Home Page
After you start E180, on the touch screen will appear the home page, showing three
main menu functions: control, printing and setting. Click on the three menus respectively to
direct detailed operation over the overall printing process.
9