Mazda MX-5 Owner's Manual page 509

3. Turn the jack screw in the direction
shown in the gure and adjust the jack
head so that it is close to the jack-up
position.
4. Place the jack under the jack-up
position closest to the tyre being
changed with the jack head squarely
under the jack-up point.
Jack head
Jacking position
5. Continue raising the jack head
gradually by rotating the screw with
your hand until the jack head is inserted
into the jack-up position.
Tyre blocks
If Trouble Arises
Flat Tyre
Jacking position
7–15