Mazda MX-5 Owner's Manual page 91

Hide thumbs Also See for MX-5:
Table of Contents

Advertisement

NOTE
It may require a few seconds for
the doors to unlock after the request
switch is pressed.
(European models)
The setting can be changed so that a
beep sound is heard for con rmation
when the doors and the boot lid, fuel-
ller ap are locked/unlocked using
a request switch.
(Except European models)
A beep sound is heard for
con rmation when the doors and the
boot lid, fuel- ller apare locked/
unlocked using the request switch.
If you prefer, the beep sound can be
turned off.
The volume of the beep sound
can also be changed. Refer to
Personalisation Features on page
9-10 .
Doors and Locks
NOTE
Use the following procedure to
change the setting.
1. Switch the ignition off and close
both of the doors and the boot lid.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
LOCK button on the key for 5
seconds or longer.
Both of the doors and the boot lid,
fuel- ller ap lock and the beep
sound activates at the currently
set volume. The setting changes
each time the LOCK button on the
key is pressed and the beep sound
activates at the set volume. (If the
beep sound has been set to not
activate, it will not activate.)
4. The setting change is completed
by doing any one of the following:
Switching the ignition to ACC
or ON.
Closing the driver's door.
Opening the boot lid.
Not operating the key for 10
seconds.
Pressing any button except the
LOCK button on the key.
Pressing a request switch.
(With theft-deterrent system)
The hazard warning lights ash when
the theft-deterrent system is armed or
turned off.
Refer to Theft-Deterrent System on
page 3-55 .
(With double locking system)
Pressing the request switch twice
within 3 seconds will activate the
double locking system.
Refer to Double Locking System on
page 3-13 .
Before Driving
3–15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents