Functional Description; Carton Contents - Delta 36-729 Instruction Manual

EXTENSION CORDS
Use proper extension cords. Make sure
your extension cord is in good condition and is a 3-wire
extension cord which has a 3-prong grounding type
plug and matching receptacle which will accept the
machine's plug. When using an extension cord, be sure
to use one heavy enough to carry the current of the
machine. An undersized cord will cause a drop in line
voltage, resulting in loss of power and overheating. Fig.
D-1 shows the correct gauge to use depending on the
cord length. If in doubt, use the next heavier gauge. The
smaller the gauge number, the heavier the cord.
FOREWORD
Delta Model 36-729 is a 10" cabinet saw. The cabinet saw has a powerful 3 H.P. motor, and a large 36" x 27" cast-iron
table with extension wings.
NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE CURRENT PRODUCTION
MODEL. ALL OTHER ILLUSTRATIONS CONTAINED IN THE MANUAL ARE REPRESENTATIVE ONLY
AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED
TO ILLUSTRATE TECHNIQUE ONLY.
Carefully unpack the machine and all loose items from
the shipping container(s). Remove the protective coating
from all unpainted surfaces. This coating may be removed
with a soft cloth moistened with kerosene (do not use
acetone, gasoline or lacquer thinner for this purpose). After
cleaning, cover the unpainted surfaces with a good quality
household floor paste wax.
STYROFOAM PACKING AND ANY OTHER LOOSE
ITEMS FROM THE INSIDE OF THE SAW CABINET.
1. Remove the four bolts (two of which are shown) that
attach the cabinet saw (A) Fig.2, to the shipping skid.
2. Save the four bolts and the plates that mounted the
cabinet saw to the shipping skid, these bolts and plates
can be used to permanently mount the cabinet saw to a
supporting surface.
3. With two or more people slide the cabinet saw off of
the shipping skid.

FUNCTIONAL DESCRIPTION

CARTON CONTENTS

REMOVE THE
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
Rating Volts
0-6 240
0-6 240
0-6 240
0-6 240
6-10 240
6-10 240
6-10 240
6-10 240
10-12 240
10-12 240
10-12 240
10-12 240
12-16 240
12-16 240
12-16 240
A
7
Total Length Gauge of
of Cord in Feet Extension Cord
up to 50 18 AWG
50-100 16 AWG
100-200 16 AWG
200-300 14 AWG
up to 50 18 AWG
50-100 16 AWG
100-200 14 AWG
200-300 12 AWG
up to 50 16 AWG
50-100 16 AWG
100-200 14 AWG
200-300 12 AWG
up to 50 14 AWG
50-100 12 AWG
GREATER THAN 100 FEET NOT RECOMMENDED
Fig. D-1
Fig. 2