Monthly Vander-Lift Ii™ Inspection Checklist - Vancare VANDER-LIFT II B450 Operating Manual

33
INSTRUCTIONS: Use one page for each VANDER-LIFT II™. Check each blank as that item is inspected. Note date inspected, initials of
maintenance staff member who performed inspection and repairs or adjustments made in the "COMMENTS" column.
Serial Number of Lift
JAN
Check nuts & bolts for
tightness
Inspect welds for cracks,
rusting & damage
Inspect hanger bar
welds & tolerance
(See diagram below)
Inspect wire connections
Check casters for
tightness/lint
Check battery voltage*
*24 volts if fully charged, approx. 12.0 volts if partially discharged (+ or - .5 volt). If voltage decreases by 4 – 5 volts, change the battery.
HANGER ROD DIAGRAM
Grommets
Verify grommets and hanger rods are present and in working condition.
Please follow the maintenance and inspection procedures outlined in the product manuals and record accordingly.
Based on institutional average usage data, Vancare recommends that all lifts be replaced every ten years or sooner
based upon the facilities usage and the findings during regular use, maintenance and inspections.
November 2017
MONTHLY VANDER-LIFT II™ INSPECTION CHECKLIST
FEB MAR APR MAY
Hanger rod
For your nearest Distributor call, 1-800-694-4525
JUN JUL AUG SEP
Year
OCT NOV DEC COMMENTS
33