Cessna 177 SERIES Service Manual page 36

ic'^
~
ALL LINKAGE
f{ \
~
POINT PIVOTS
OG6 ,,~ /...? .
PARKE;G BRAKE
RUDDER BARS AND PEDALS
FANDLE SHAFT
GL
~~~~GL ~
GL ,'- '
VING-ATTACH BUSHINGS
-
NOTES
Seaied bearings require no lubrication.
0Do not lubricate roller chains or cables except under seacoast conditions. Wipe
with a clean, dry cloth.
Lubricate unsealed pulley bearings, rod ends, Oilite bearings, pivot and hinge
points. and any other friction point obviously needing lubrication, with general pur-
pose oil every 1000 hours or oftener if required.
Paralfin wax rubbed on seat rails will ease sliding the seats fore and aft.
Lubricate door latching mechanism with MIL-G-81322A general purpose grease,
applied sparingly to friction points, every 1000 hours or oftener if binding occurs.
No lubrication is recommended on the rotary clutch.
Figure 2-4. Lubrication (Sheet 3 of 3)
?2-16
-:an-e
5