Malfunction Indications Appearing On The Display - Fhiaba 1T Series User Manual

13.2

Malfunction indications appearing on the display

Display message Malfunction description
Power Failure
Prolonged interruption of electrical power
The appliance starts up again automatically and indicates the highest recorded temperatures
Door open Door open
this message appears few minutes from the door opening
Drawer open Drawer open
this message appears few minutes from the drawer opening
Cellar too warm Cellar (Wine Cellar) compartment too warm
See the troubleshooting guide
Cellar too cold
Cellar (Wine Cellar) compartment too cold
Wait 12 hours. If the problem persists, contact Customer Care
Cantina too warm
Cantina compartment too warm
See the troubleshooting guide
Cantina too cold Cantina compartment too warm
Wait 12 hours. If the problem persists, contact Customer Care
Fridge too warm TriMode compartment (refrigerator mode) too warm
See the troubleshooting guide
Fridge too cold TriMode compartment (refrigerator mode) too cold
Wait 12 hours. If the problem persists, contact Customer Care
Cooler too warm
TriMode compartment (cooler mode) too warm
See the troubleshooting guide
Cooler too cold TriMode compartment (cooler mode) too cold
Wait 12 hours. If the problem persists, contact Customer Care
Freezer too warm TriMode compartment (freezer mode) too warm
See the troubleshooting guide
Freezer too cold TriMode compartment (freezer mode) too cold
Wait 12 hours. If the problem persists, contact Customer Care
Error Code...
Functional problems
call Customer Care who may help you to salve the problem or put you in contact with the
nearest Service Agent
Check condenser Check Condenser
Every 6 months the display shows the message "Check Cond", clean the condenser and press
for 5 seconds the Enter
www.fhiaba.com ∙ info@fhiaba.com ∙ Info Line 800-344222 ∙ Tel +39 (0)434 420160 ∙ Fax +39 (0)434 420161
Troubleshooting guide
button to reset.
13
EN
73