Trounbleshotting Guide; Trounbleshotting; Malfunction Indications Appearing Of The Display - Fhiaba XS5991TWT6U User Manual

11. TROUBLESHOOTING GUIDE
11.2 Malfunction indications appearing on the display
Display message
Power Failure
Door open
Drawer open
Cellar too warm
Cellar too cold
Cantina too warm
Cantina too cold
Fridge too warm
Fridge too cold
Cooler too warm
Cooler too cold
Freezer too warm
Freezer too cold
Error Code...
Check condenser
> In case of anomalities, touch the button Alarm
error number code.
> The message will be shown for 3 seconds, then it will go back to the home
> For blocking the message on the screen, press on the display, the button info
the screen for 30 seconds, then it will go back to the home screen.
> In the case there is more than one error message, the dispay will show in time sequence the different
anomalies messages.
34 www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
Malfunction description
Prolonged interruption of electrical power
The appliance starts up again automatically and indicates
the highest recorded temperatures.
Door open
this message appears few minutes from the door opening
Drawer open
this message appears few minutes from the drawer opening
Cellar (Wine Cellar) compartment too warm
See the troubleshooting guide
Cellar (Wine Cellar) compartment too cold
Wait 12 hours. If the problem persists, contact Customer Care
Cantina compartment too warm
See the troubleshooting guide
Cantina compartment too warm
Wait 12 hours. If the problem persists, contact Customer Care
TriMode compartment (refrigerator mode) too warm
See the troubleshooting guide
TriMode compartment (refrigerator mode) too cold
Wait 12 hours. If the problem persists, contact Customer Care
TriMode compartment (cooler mode) too warm
See the troubleshooting guide
riMode compartment (cooler mode) too cold
Wait 12 hours. If the problem persists, contact Customer Care
TriMode compartment (freezer mode) too warm
See the troubleshooting guide
TriMode compartment (freezer mode) too cold
Wait 12 hours. If the problem persists, contact Customer Care
Functional problems
call Customer Care who may help you to salve the problem or put you in
contact with the nearest Service Agent
Check Condenser
Every 6 months the display shows the message "Check Cond", clean the
condenser and press for 5 seconds the Enter
and the display will show the anomaly message with its
button to reset.
screen.
( ). The message will be on