Module Replacement Procedure - Passive Modules - Cisco GS7000 Installation And Configuration Manual

Module Replacement Procedure - Passive Modules

Follow this procedure to remove and replace the optical passive devices from their
mounting tray in the housing base.
1 Open the housing. See Opening and Closing the Housing (on page 94).
2 Carefully tag and remove any optical fibers from the passive module.
OL-29936-01
WARNING:
Laser light hazard. Never look into the end of an optical fiber or connector.
Failure to observe this warning can result in eye damage or blindness.
Removing and Replacing Modules
101