Cisco GS7000 Installation And Configuration Manual page 39

6 Use a torque wrench and a 1/2-inch socket to tighten the strand clamp bolts
from 5 ft-lb to 8 ft-lbs (6.8 to 10.8 Nm).
Note: A slight tilt of the face of the housing is normal. Cable tension will cause
the housing to hang more closely to vertical.
7 Connect the coaxial cable to the pin connector according to the pin connector
manufacturer's specifications.
8 Continue to Housing Lid Fiber Optic Cable Installation - Active Modules (on
page 20).
OL-29936-01
Strand Mounting
17