Setting The Current Time; Connecting An External Amplifier - Xomax XM-RSU256BT User Manual

The and buttons jump to a random track in this mode.
5/-10 & 6/+10
1. You can use these buttons to jump 10 tracks forward or backward during playback. If there
are less than 10 tracks remaining at the start or end of the playlist, the player goes to the first
or last track.
2. You also can use these buttons to select folder forward or backward during playback.
Press 5/-10 for 2 seconds, you can select the former folder, and press 6/+10 2 seconds, you
can select the next folder.
and
Press the buttons repeatedly to move to the previous or next track. Track number shows on
the display.
If you press and hold these buttons, you can fast forward or backward the current track. Play
starts from when you release the button.
AUX STEREO INPUT
You can connect any external device with a headphone output to the front panel through a 3.5
mm stereo Jack.
You can listen to these portable devices in good quality through your car radio's speakers if
you select the AUX mode by pressing the MODE button.
● In order to connect products that do not have a 3.5 mm earphone output (e.g., cell phones)
you may need to purchase an external adapter.
● For further information, refer to the instructions of the device you wish to connect.

SETTING THE CURRENT TIME

When the player is on or off status, press and hold the CLK button for several seconds until
the clock time is blinking, rotate SEL knob clockwise or anti-clockwise to adjust the hours,
then press SEL button switch to minutes adjustment, rotate SEL knob clockwise or
anti-clockwise again to adjust the minutes. Finally, press CLK button to confirm the
adjustment.
● Press CLK button, the current clock time is displayed and it will returns to previous display
after it has not been adjust for 3 seconds or press it again.

CONNECTING AN EXTERNAL AMPLIFIER

The preamp output at the back of the head unit allows you to connect an external amplifier or
active sub box with a low input level to the player.
This way you can achieve even better volume and sound quality.
White RCA socket: right channel output; Red RCA socket: Left channel output.
【WARNINGS】
● Before starting to use the player, read these instructions carefully, then keep them in an
accessible place for future reference.
● If needed, consult a technician before installing the player to avoid damaging the product or
your vehicle.
● While underway, do not do anything that distracts your attention from driving. Manipulating
7