2.6
Cable connections
•
•
Pre-connected system cables
1.
8-pin BPPWR1 power connector (from power supply to backplane)
2.
Auxiliary panel 1 connector (from motherboard to front I/O board)
3.
Auxiliary panel 2 connector (from motherboard to front I/O board)
4.
System fan connectors (from motherboard FAN1-8 to system fans)
5.
Panel connector (from motherboard to front I/O board)
6.
OCU-USB to USB connector (from motherboard to front I/O board)
7.
SATA connectors (from motherboard to SATA/SAS backplane board)
8.
ISATA connectors (from motherboard to SATA/SAS backplane board)
2-36
The bundled system cables are pre-connected before shipment. You do not need to
disconnect these cables unless you are going to remove pre-installed components to
install additional devices.
Refer to Chapter 4 for detailed information on the connectors.
Chapter 2: Hardware Information