Save Gcode In Cura - AnyCubic i3 MEGA User Manual

Use tweezers to carefully get rid of the pre-extruded filament.
Note: If it fails to connect the printer in the popup "Printing window" (in a case that the
"Print" icon is gray and unavailable), check with the COMx or Baudrate in "Machine
settings", and re-open the printing window to proceed.

5.2.5 Save GCode in Cura

In Cura, click "File"--->"Save GCode..." to save the file to a desired directory. And it
is highly recommended to save the Gcode in a SD card for printing offline.

Re-open the Gcode file again in Cura to confirm that all slices of the model have
been included by check it in the "Layers view" (refer to previous Fig. 20).
The file name should only contain English letters, underscore and space. File

name contains special characters could not be recognized by the printer.
Approx printing time
(Figure 25)
25