Advertisement
Preliminary Document
Red indicator. User can try recycling the power which will allow the unit to go thru its
automatic set up operation but if the problem persists contact your service provider.
Indicators
The Link2Cell™-19 is equipped with three LED indicators on the end of the unit which
provide the following information:
During normal operation:
Indicator
Green
Red
Amber
Initial System Automatic Set Up:
(First 2-3 minutes of DC power being applied)
Indicator
Green
Amber/Red
Amber
Red
Amber/Red
Amber/Red
*Green Indicator will go to a solid indication once the initial set up is complete.
TM
Link2Cell
-19
Manual
Confidential
State
Off
Solid Indication
Flashing Indication
Flashing Indication
Solid Indication
Flashing Indication
Solid Indication
State
Flashing Indicator
Solid On, Both
Solid On Indication
Solid On Indication
Flashing Both
Off, both
EMS Wireless
Description
No DC Input Power Applied
DC Power on, normal function
System Initialization, Auto Set Up
Warning, fault condition
(Unit will reset gain to stable
operation)
Alarm
(Contact your Service Provider)
No RF Signal Detected
(<-90 dBm)
Weak RF Signal
(>-85 dBm)
Description
System Initialization, Auto Set Up
>76 dB Gain
>73 dB Gain
>70 dB Gain
>67 dB Gain
<64 dB Gain
9
Advertisement
