To connect your RF-HTN104 to another device using the PIN Code method:
1. Login to your RocketFish router and click on the
2. Select WPS from the menu on the left side of the screen. You will see a PIN Code listed under Current PIN Code. If there is no PIN Code, click Generate New PIN
Code.
The default PIN Code is also printed on the bottom of your router.
3. Enter the PIN Code into your other wireless router.
Home Router.
Your router will connect to the remote wireless router.
You can verify that the router and client connected successfully by going to the Wireless Status screen. See the section titled "Checking the Wireless Network status" for
more information.
Disabling and Enabling WPS
By default, WPS is enabled. If you want to disable WPS, click the Disable WPS button and click
Configured. To enable it again, click Enable WPS and click
icon
When your other router has begun the invitation, press the CONNECT button on the front of your Wi-Fi Invite
to save the changes. The Current WPS Status will change to Disabled /