Table of Contents
Advertisement
Manual
If you have a static IP address and wish to specify your connection details manually,
check the Manual radio button. You will need to know your IP Address, Subnet Mask,
Default Gateway, Preferred DNS, Alternate DNS and the MTU.
IP Address: Enter the IP Address assigned by your Internet Service Provider (ISP). The IP
Address must contain four octets separated by a dot (x.x.x.x). The router will not accept
the IP Address if it is not in this format.
Subnet Mask: Enter the Subnet Mask assigned by your ISP
Default Gateway: Enter the Default Gateway assigned by your ISP
DNS Servers: The preferred and alternate DNS Server details will be supplied by your
ISP
MTU: You may need to change the MTU for optimal performance. Your ISP should provide you with the size of the Maximum Transmission Unit. It is set to 1500 by default.
Click the
button to save your settings when you are finished. If you wish to cancel, press the
button.
39
Advertisement
Table of Contents
