Table of Contents
Advertisement
Configuring the DHCP Server
The RF-HTN104 can act as a Dynamic Host Control Protocol (DHCP) Server,
providing internal network addresses to the devices you connect on your LAN.
Check the Enable DHCP Server box if you wish to use the DHCP server on the
router and ensure that your computers are set to DHCP clients by setting the
TCP/IP settings to "Obtain an IP Address automatically". If you have another DHCP
server on your network, please disable the DHCP server on the router to avoid
conflicts.
Using the DHCP Server you can connect up to 100 devices to your router including
both wired and wireless connections. They will dynamically be assigned addresses
with the last octet of the address beginning at 100 by default, as devices are
connected. You can adjust the range here if you prefer by entering your own
range into the Host ID Range.
Additionally, you can specify a domain name and the time (in minutes) to lease for
the IP Addresses.
35
Advertisement
Table of Contents
