Configuring Advanced Wi-Fi 2.4Ghz Settings - RocketFish RF-HTN104 User Manual

Configuring Advanced Wi-Fi 2.4GHz Settings

To adjust the advanced settings of the 2.4GHz Wi-Fi function, login to the router and click on the
Note: It is only recommended that you change these settings if you are experienced and familiar with what each of these settings does.
Channel: Select a channel from the drop down menu. For best
performance, choose a channel which is not in use by other wireless
devices in your area.
Wi-Fi Mode: Select a mode from the drop down menu. This will affect
the wireless connection speed of your devices. Some older devices may
not work if you choose to work in 11n alone.
Enable WMM: Wi-Fi Multimedia (WMM) is Quality of Service (QoS) for
your router. Check this box to improve the quality of video and voice
applications for your wireless clients. This cannot be selected for modes
where 11n is operational.
Bandwidth: Select the frequency which you want to operate on by
checking the radio box for 20MHz or 20/40MHz.
Guard Interval: The guard interval is the space between symbols being
transmitted. It is often confused with the space between packets.
Normal 802.11 operation is 800ns but with 802.11n, you may halve the
time to wait to 400ns which can increase throughput.
Tx Rate: Only modifiable if 11n Wi-Fi Mode is selected. This allows you
to specify the maximum transmission rate for the wireless network.
Tx Power: Sets the transmission power. Modifying this can help you to
achieve more range on your network.
Preamble Type: The Preamble Type defines the length of the Cyclic Redundancy Check (CRC) block for communication between the
icon, then select Performance-2.4GHz from the menu on the left.
router and roaming wireless adapters.
刪除 刪除: Access Point
刪除 刪除
49