Hammerhead HLMT100 Manual page 4

SAFETY INSTRUCTIONS
Safety Instructions for Power Supply
• Read and understand all instructions. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
• Keep the power supply away from rain or moisture. Penetration of water into the
power supply increases the risk of an electric shock.
• Only use the power supply for the model of HLMT100. Otherwise, there is danger of
fire and explosion.
• Keep the power supply clean. Contamination can lead to danger of an electric shock.
• Before each use, check the power supply, cable and plug. If damage is detected, do
not use the power supply. Never open the power supply yourself. Have repairs performed
only by a qualified technician and only using original spare parts. A damaged power
supply, cable or plug increases the risk of an electric shock.
• Do not operate the power supply on easily inflammable surfaces (e.g., paper,
textiles, etc.) or surroundings. The heating of the power supply during the charging
process can pose a fire hazard.
• Supervise children. This will ensure that children do not play with the power supply.
• Children or persons that, owing to their physical, sensory or mental limitations or
to their lack of experience of knowledge, are not capable of securely operating the
power supply, and may only use this power supply under supervision or after
having been instructed by a responsible person. Otherwise, there is danger of
operating errors and injuries.
• If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of
the proper configuration for the power outlet.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS
DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
4 COMPACT LASER MEASURING TOOL