Safety Instructions - Hammerhead HLMT100 Manual

SAFETY INSTRUCTIONS

Safety Instructions for Compact Laser Measuring Tool
WARNING
LASER RADIATION. Do not stare into beam. ClassII laser product. Turn the laser beam on
only when using this tool.
• Do not remove or deface any product labels.
• Avoid direct eye exposure. The laser beam can cause flash blindness.
• Do not operate the tool around children or allow children to operate the tool.
• Do not place the tool in a position that may cause anyone to stare
at the laser beam, whether intentionally or unintentionally.
• Do not use on surfaces such as sheet steel that have shiny,
reflective surfaces. The shiny surface could reflect the beam
back at the operator.
• Always turn the laser tool off when not in use. Leaving the tool
on increases the risk of someone inadvertently staring into the laser
beam.
• Do not attempt to modify the performance of this laser device in any
way. This may result in a dangerous exposure to laser radiation.
• Do not attempt to repair or disassemble the laser-measuring tool.
If unqualified persons attempt to repair this product, serious injury
may occur. Any repair required on this laser product should be
performed only by qualified service personnel.
• Use of other accessories that have been designed for use with
other laser tools could result in serious injury.
• Do not operate the tool outdoors.
• Do not place or store tool under extreme temperature conditions.
COMPACT LASER MEASURING TOOL 3