Troubleshooting; Warranty - Hammerhead HLMT100 Manual

TROUBLESHOOTING

PROBLEM
Tool cannot be
switched on.
Error code shows
on display.

WARRANTY

This compact laser measuring tool is warranted to the original purchaser from the original
purchase date for two years, plus one additional year with product registration at www.
hammerheadtools.com (2+1), for a total three years subject to the warranty coverage
described herein.
Please retain your receipt.
This compact laser measuring tool is warranted to the original user to be free from defects
in material and workmanship. If you believe that the tool is defective at any time during the
specified warranty period, call HAMMERHEAD support at 1-877-888-1880 to speak with a
customer service agent. This warranty does not cover: (1) Part failure due to normal wear or
tool abuse (2) Any parts have been altered or modified by anyone other than an authorized
HAMMERHEAD personnel.
This warranty excludes bits, bulbs and accessories. This warranty gives you specific legal
rights, and you may also have other rights that vary from state.
14
CAUSE
The battery charge is too low.
The power button did not
contact well.
Please refer to "Error signals"
above.
SOLUTION
Charge the battery.
Try to press the power button more
firmly or call customer service.
Please refer to "Error signals"
above.
COMPACT LASER MEASURING TOOL