Package Content; Additional Equipment Required - Alvarion WBSAC-2450 Quick Installation Manual

Package Content


WBSac-2450 access point

Wall Mount Base

Pole Mount Bracket

Pole mounting steel band

Wall mounting bots X 4

Mounting screws X 8
 5GHz Omni antennas X 2 (for –O products only)
 2.4GHz Omni antennas X 2 (for –O products only)

POE adapter

Grounding screw and cables

Additional Equipment Required


Shielded Ethernet cable (outdoor shielded CAT5e/6 4-pair data cable, with RJ45 shielded plugs)
Note: Maximum cable length: 100 meters

Lightning protection – use only the devices recommended by Alvarion

1"-2.5" diameter pole (on which to mount the unit in case of pole installation)

Tilting Kit (can be ordered separately when required)
Important Information
Warnings

The WBSac access point must be used only with Alvarion-approved components and the antennas
provided as part of the original package.

Only experienced installation professionals who are familiar with local building and safety codes and
are licensed, wherever applicable, by the appropriate government regulatory authorities, should install
outdoor units and antennas. This device requires Professional Installation for compliance with FCC
Requirements. (Please refer to page 11 for Installation Instructions).

Modifying the operating frequency or enhancing the transmit output power through the use of external
amplifiers or other equipment is illegal.
Note: Certain versions of this device (those with –US extension in their product name) comply
with part 15 of the FCC Rules. In these cases, operation is subject to the following two conditions:

This device may not cause harmful interference

This device must accept any interference received, including such interference that may cause
unrequired operating effects.
For further information, please contact Alvarion Technical Support at:
Page | 2
support@alvarion.com
DOC00182-00 rev-B