Alvarion WBSAC-2450 Quick Installation Manual page 11

FCC- Professional installation instruction
1. Installation personal
This product is designed for specific application and needs to be installed by a qualified personal who
has RF and related rule knowledge. The general user shall not attempt to install or change the setting.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept 27cm from nearby
person in normal operation condition to meet regulatory RF exposure requirement.
3. External antenna
Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may
produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC
limit and is prohibited.
4. Installation procedure
Please refer to user's manual for the detail.
5. Warning
Please carefully select the installation position and make sure that the final output power does not
exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal
penalty.
When professional installer will set work frequency in the GUI to be within UNII-1 band – the software
will automatically apply EIRP limit of 21dBm to comply with FCC requirements of Part 15.407(a)(1)(i)
Antenna information:
2.4G: Dipole antenna with 4.6dBi, N-Type for outdoor use.
Manufacturer / Model: Senao Networks Inc. / 5718A0136300
5G: Dipole antenna with 6.03dBi, N-Type for outdoor use.
Manufacturer / Model: Senao Networks Inc. / 5718A0137300
For further information, please contact Alvarion Technical Support at: support@alvarion.com
Page | 11
DOC00182-00 rev-B