Using Save Modes - Samsung SF-555P User Manual

1.22
Getting Started

Using Save Modes

There is four saving mode buttons on the front panel of the series. Using
these buttons, you can save toner and power consumption, paper for
printing, and toll for the fax call.
Toner Save Mode
Toner Save mode allows the machine to use less toner on each page.
Press Toner on the front panel to turn this mode on or off.
• If the LED is on, Toner Save mode activates and the machine uses less
toner by 50% to print a page. Using this mode will extend the life of
your toner cartridge and reduce your cost per page, but will reduce
print quality.
• If the LED is off, Toner Save mode deactivates and the machine prints
in the normal mode.
Power Save Mode
Power Save mode allows you to save the power consumption.
Press Power on the front panel to turn this mode on or off.
• If the LED is on, Power Save mode activates and the machine will go to
a reduced power state. But it takes long to receive incoming faxes for
warming up the machine.
• If the LED is off, Power Save mode deactivates and the machine keeps
ready to operate with the minimum warm-up time. This uses more
energy to keep your machine warm and ready to print.
To specify how long the machine waits before going to the Power Save
mode, press and hold down Power, and select the desired time length
among 5MIN, 10MIN and 15MIN using ➛ or ❿. Selecting OFF turns
the Power Save mode off.
Note: Although you turned Power Save mode off by pressing Power, it
activates if you have set the time length.