Residual Risk; Risk Reduction; Know Your Product; Symbols On The Product - Ryobi RLT3626DE Original Instructions Manual

working condition.
■ Bring the product to an authorised service centre to
replace damaged or unreadable labels.
BATTERY PROTECTION FEATURES
Ryobi 36V Lithium-Ion batteries are designed with features
that protect the Lithium-Ion cells and maximise battery
life. If the tool stops during use, the following may be the
causes:
■ The maximum current draw of the battery has been
exceeded, causing it to automatically stop powering the
tool. Release the trigger to reset the tool and pull the
trigger to resume operation.
■ Excessive temperatures will cause the battery to stop
powering the tool. Feel the battery pack; if it is too
warm, allow it to cool down.
If the tool still does not work, recharge the battery.
NOTE: The battery pack indicator LED will not work if the
battery protection feature has caused the battery pack to
stop powering the tool. Release the tool trigger or remove
the battery pack from the tool and the battery pack LED
indicator will resume normal function.

RESIDUAL RISK

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
Injury caused by vibration
–
Hold the tool by designated handles and restrict working
time and exposure.
Exposure to noise can cause hearing injury
–
Wear ear protection and limit exposure.
Eye injury due to flying debris
–
Wear eye protection at all times.

RISK REDUCTION

It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fingers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices are
all thought to contribute to the development of the these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
■ If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 7.
1. Switch trigger
2. Handle overmold
3. Lock out button
4. Front handle
5. Trimmer shaft
6. Guard
7. Line cut-off blade
8. Line
9. Battery pack
10. Battery latch
11. Charger
12. Power cord
13. Spool cover
14. Spool

SYMBOLS ON THE PRODUCT

Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Wear eye protection.
Wear ear protection.
Wear non-slip safety footwear when
using the product.
Do not use metal blade(s) on the
product.
Do not expose to rain or damp condition.
Beware of thrown or flying objects.
Keep all bystanders, especially children
and pets, at least 15m away from the
operating area.
Keep hands away from blades
Please read the instructions carefully
before using the product.
3