Adding Physical Ports To An Irf Port - HP 10500 Series Configuration Manual

Hide thumbs Also See for 10500 Series:
Table of Contents

Advertisement

Adding physical ports to an IRF port

An IRF port can have up to eight physical ports. In IRF mode, you can add more physical ports to an IRF
port. This task does not affect the ongoing traffic on the IRF port.
When you perform this task, follow the IRF physical port restrictions and configuration guidelines in
physical port
To configure IRF ports:
Step
1.
Enter system view.
2.
Enter Ethernet interface view
or interface range view.
3.
Shut down the port or ports.
4.
Return to system view.
5.
Enter IRF port view.
6.
Bind each physical port to
the IRF port.
7.
Return to system view.
8.
Enter physical IRF port view
or interface range view.
9.
Bring up the port or ports.
10.
Return to system view.
restrictions" and
"Binding physical ports to IRF
Command
system-view
shutdown
quit
irf-port member-id/port-number
port group interface interface-type
interface-number [ mode { enhanced |
normal } ]
quit
undo shutdown
quit
Enter interface range view:
interface range { interface-type
interface-number [ to interface-type
interface-number ] } &<1-5>
Enter interface view:
interface interface-type
interface-number
Enter interface range view:
interface range { interface-type
interface-number [ to interface-type
interface-number ] } &<1-5>
Enter interface view:
interface interface-type
interface-number
21
ports."
Remarks
N/A
To shut down a range of physical
IRF ports, enter interface range
view.
To shut down one physical IRF
port, enter its interface view.
If the system does not allow you
to shut down a physical port,
follow the system instruction to
shut down its remote peer port.
N/A
N/A
By default, no physical ports are
bound to any IRF port.
Repeat this step to assign
multiple physical ports to the IRF
port for link redundancy.
You can bind up to eight
physical ports to an IRF port.
The binding attempt will fail if
you have bound eight physical
ports to the IRF port.
Make sure the two ends of an IRF
link use the same binding mode.
N/A
N/A
N/A
N/A
"IRF

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents