HP 10500 Series Configuration Manual page 43

Figure 15 Network diagram
Configuration procedure
1. Identify the master.
<IRF> display irf
MemberID
*+1
1
2
2
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
The Bridge MAC of the IRF is: 000f-e26a-58ed
Auto upgrade
Mac persistent
Domain ID
The output shows that Device A is the master.
2. Examine the configuration for VLAN interfaces.
If a VLAN interface has member ports on different member devices, change the IP address for the
VLAN interface on each device to be unique after their operating mode is changed to standalone.
3. Shut down IRF physical ports to disconnect all IRF links. In this example, shut down
Ten-Gigabitethernet 1/3/0/1.
<IRF> system-view
[IRF] interface ten-gigabitethernet 1/3/0/1
[IRF-Ten-Gigabitethernet1/3/0/1] shutdown
[IRF-Ten-Gigabitethernet1/3/0/1] quit
4. Save the configuration.
[IRF] save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Slot Role Priority
0 Master 1
1 Standby 1
0 Standby 1
1 Standby 1
: no
: always
: 0
CPU-Mac
00e0-fc0a-15e0
00e0-fc0f-8c02
00e0-fc0f-15e1
00e0-fc0f-15e2
39
Description
DeviceA
DeviceA
DeviceB
DeviceB