Related Manuals for Sercomm DBC831
Summary of Contents for Sercomm DBC831
- Page 1 Wireless HD Doorbell Camera Setup Guide Document Version: 1.4 Copyright 2016. All Rights Reserved. All trademarks and trade names are the properties of their respective owners.
-
Page 2: Package Contents
Package Contents The following items should be included: If any of these items are damaged or missing, please contact your service provider immediately. Doorbell Camera x 1 Micro USB to USB Cable x 1 Mounting Bracket with Anti-theft Screw x 1 Screw/Anchor x 2 Gradienter x 1 Splice Connectors x 2... - Page 3 Allen Key...
- Page 5 Camera's features, components and capabilities. Overview DBC831 is a WiFi enabled video doorbell camera that lets you answer the door from your iOS or Android mobile device no matter where you are in the world. This device features a video camera, built-in microphone and a speaker that allows you to see, hear and speak to your visitors from a smart phone, tablet or PC.
- Page 6 Product Features Features • Doorbell Camera. Takes a snapshot/live video when a visitor rings the doorbell, so you can see who is outside. It also allows you to stream video, audio or both simultaneously. Note：The intercom is up to 2 minutes. •...
-
Page 7: Basic Setup
Chapter 2 Basic Setup This Chapter provides details on how to install and configure the Wireless HD Doorbell Camera. System Requirements • To use the Wireless interface on the wireless model, other Wireless devices must be compliant with the IEEE802.11b, IEEE802.11g, or IEEE802.11n specifications. - Page 8 Microphone The built-in microphone is useful for bi-direction voice conversation. PIR LED The sensor is used to help the camera to detect motion within 3 meters. This button has three functions: Doorbell/WPS WPS. Push the WPS button on the device Button and on your other wireless device to perform WPS function that easily creates an...
- Page 9 Rear Panel - Wireless HD Doorbell Camera Figure 3: Rear Panel Micro-USB Connector Use the micro USB cable included in the package to plug in Micro USB connector for charging the battery. ON/OFF Switch Use this switch to turn the device on/off Reset Button Use a pin or paper clip to press and held over 10 seconds, the settings of Doorbell...
-
Page 10: Before You Begin
Note: Please ensure that the Wireless HD Doorbell Camera is configured and added to the network before mounting it. Note: If DBC831 is using for engineering develop purpose, it is available to use Mirco USB cable to charge the battery for replacing the transformer. And doorbell does not require to attach with the chimer. - Page 11 2) Press the Doorbell/WPS button of the camera for up to 15 seconds and on your Wireless device (AP or router) as well to establish a wireless connection automatically. The wireless connection is successful when the LED (Amber) is fast blinking. 3) Obtain the IP Address of Doorbell on Wireless device (AP or router) device page.
- Page 12 Enter the name and password assigned to you by the Doorbell administrator. The default log in Administration: User Name: administrator Password: Blank 9) Access the Administration for more Doorbell settings on DBC831 GUI.
- Page 13 Step 3: Switch to analog or digital chime according to your existing doorbell in the process. (The customers are required to develop this feature on the App) Step 4: Complete the pairing process and unplug the Micro USB cable from the Doorbell Camera. Step 5: Identify the location for mounting the Doorbell Camera.
- Page 14 Step 8: Connect the AC wires on the Doorbell Camera to the chime and transformer by using the provided splice connectors, as shown in the following diagram. Use the pliers to connect the wires by using the two splice connectors to ensure the wires are firmly attaching together. Step 9: Turn the switch (on the back) on.
- Page 15 Step 10: Attach the Doorbell Camera to the mounting bracket and secure them with the anti-theft screw via the Allen key. Make sure the Doorbell Camera is firmly fixed and working properly. Note: If the Doorbell Camera is being triggered too often, the battery capacity tends to decrease at low level and then the camera will just support ring-only mode.
-
Page 16: Specifications
Appendix A Specifications Wireless HD Doorbell Camera Model Wireless HD Doorbell Camera Dimensions 42mm (W) x 111.8mm (H) x 24.9mm (D) Operating -20° C to 50° C Temperature (The battery won't be charged when temperature is <0°C ) Video compression H.264 Main Profile and MJPEG Image resolution 720p (1280*720),VGA (640*480), QVGA (320*240) - Page 17 occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: •...
Need help?
Do you have a question about the DBC831 and is the answer not in the manual?
Questions and answers