Swegon Casa Cooker Hood Directly Connected To The Ventilation Unit - Swegon CASA R3 Smart Installation, Commissioning And Maintenance Instructions

Hang the ventilation unit up in the mounting frame
so that the rear of the unit engages in the suspension
plate. Lift the ventilation unit up against the ceiling
mounting frame so that the locking hooks on both sides
engage into position. The unit is firmly secured if the
screw heads on the front part of the ceiling mounting
frame return to their original positions. The ventilation
unit can then be secured into position by screwing in
the locking screws to their end positions.
1
2
1. Suspension plate
2. Locking hooks
3. Lock screw
2.1.3 Swegon CASA cooker hood directly
connected to the ventilation unit
The Swegon CASA Jazz cooker hood can be mounted
directly against the ventilation unit, and in this case
the extract air duct should be connected directly to the
duct connection on the bottom of the unit. Secure the
cooker hood to the ventilation unit using the screws
supplied. The cooker hood is available in right-hand and
left-hand versions depending on the ventilation unit's
model.
The ventilation unit can be controlled from the cooker
hood control panel.
The electric and control cables as well as the connection
for the cooker hood's extract air are located under the
cover plates in the bottom of the unit.
Swegon reserves the right to alter specifications.
3
115 mm
The fan's
mounting screws
The kitchen airflow from
the cooker hood during
operation in the boosted
flow mode
www.swegonhomesolutions.com
R3.051016
The kitchen's general
ventilation via extract air
register
∅ 125 mm
Acoustic insulation
7