Determining The Installation Position - Huawei AP4130DN Quick Start Manual

AP4130DN Quick Start Guide

2.3 Determining the Installation Position

When determining the AP installation position, comply with the following rules:




Indoor APs are usually mounted on a wall or ceiling using sheet metal mounting brackets. The
installation position is determined by the site survey. There must be at least 200 mm clearance
between the cabling end of the AP and the wall. Figure 2-1 shows dimension and Figure 2-2
shows space requirements.
Issue 01 (2015-02-06)
Try to reduce the number of obstacles, such as walls, between the AP and user terminals.
Install the AP away from electronic devices that can cause radio interference, such as the
microwave oven.
Install the AP in a hidden position that does not affect daily lives and work of residents.
Install the AP in a site that is free from leaking or dripping water, heavy dew, and
humidity, and take protective measures to prevent water from flowing into the equipment
along the cable.
Figure 2-1 Dimension of AP4130DN（Unit: mm）
华为专有和保密信息
版权所有 © 华为技术有限公司
Contents
13