Logging In To The Ap Using A Web Client - Huawei AP4130DN Quick Start Manual

Table of Contents

AP4130DN Quick Start Guide

3.3 Logging In to the AP Using a Web Client

Pre-configuration Tasks

Before configuring users to log in to the AP using HTTP, complete the following task:

Configure reachable routes between the terminal and the AP.

Procedure

Step 1 Open a web browser on a PC, and enter the management address in the format of

http://169.254.1.1 in the address bar. Ensure that the PC and AC can communicate with each

other. Then press Enter. Set the language, user name, and password. The HTTPS login

URL is displayed in the address box indicating that the system has gone to the HTTPS login

page.

Step 2 Click Login or press Enter. The web system home page is displayed. You can manage and

maintain the equipment. For details, see the Huawei Wireless Access Points Web-based

Configuration.

Issue 01 (2015-02-06)



The web management system is enabled on the AP before delivery. The default IP address of the web

management system is 169.254.1.1 and the mask is 255.255.0.0. The web management system

provides a default user account, with the user name admin and password admin@huawei.com. You

are advised to change the user name and password on your first login. Assign your PC an IP address

on the same network segment as the default IP address of the web management system, and connect

the PC to the GE interface. Start the web browser on the PC and visit http://169.254.1.1 to log in to

the web management system.



You can only log in to the FAT AP using the web platform.

You can also enter https://IP address in the address box to log in to the AP using HTTPS. HTTPS

ensures security of login information during login and security of data exchanged during subsequent

operations.

华为专有和保密信息

3 Logging In to the AP

Table of Contents