Post Behavior Screen Options - Dell Latitude 5289 Owner's Manual

Option Description
Type-C connector
•
power
•

POST behavior screen options

Option Description
Adapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings
Keypad Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.
(Embedded)
•
•
Mouse/Touchpad Allows you to define how the system handles mouse and touch pad input. The options are:
•
•
•
Numlock Enable Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.
Fn Key Emulation Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.
Enable Fn Key Emulation (default)
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their standard
and secondary functions. If you disable this option, you cannot toggle dynamically the primary behavior of these
keys. The available options are:
•
•
MEBx Hotkey Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
Default Setting: Enable MEBx Hotkey
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
•
•
•
Extended BIOS Allows you to create an extra preboot delay. The options are:
POST Time
•
•
7.5 Watts
15 Watts—enabled by default
Fn Key Only—default.
By Numlock
NOTE: When setup is running, this option has no effect. Setup works in Fn Key Only
mode.
Serial Mouse
PS2 Mouse
Touchpad/PS-2 Mouse: This option is enabled by default.
Lock Mode Disable/Standard—enabled by default
Lock Mode Enable/Secondary
Minimal
Thorough—enabled by default
Auto
0 seconds—enabled by default.
5 seconds
System setup 43