Installing The Base Cover; Battery; Removing The Battery; Installing Battery - Dell Latitude 5289 Owner's Manual

Installing the base cover

1 Align the base cover tabs to the slots on the edges of the computer.
2 Press the edges of the cover until it clicks into place.
3 Tighten the M2.5 x 5.0 captive screws to secure the base cover to the computer.
4 Follow the procedure in

Battery

Removing the battery

1 Follow the procedure in
2 Remove:
a MicroSD card
b base cover
3 To remove the battery:
a Lift the ribbon and slide the cable to disconnect the battery cable from the connector on the system board [1].
b Remove the M2.0 x 4L screws that secure the battery to the computer [2].
c Lift the battery from the computer [3].

Installing battery

1 Insert the battery into the slot on the computer.
2 Connect the battery cable to the connector on the system board.
After working inside your computer.
Before working inside your computer.
Removing and installing components 11