Table of Contents
Advertisement
Option
Description
•
•
•
•
•
•
•
Touchscreen
It controls whether the screen is enabled or disabled. This option is enabled by default.
Unobtrusive Mode
This option, when enabled, pressing Fn+F7 turns off all light and sound emissions in the system. To resume normal
operation, press Fn+F7 again. This option is disabled by default.
Miscellaneous
Allows you to enable or disable the following devices:
Devices
•
•
•
•
Video screen options
Option
Description
LCD Brightness
Allows you to set the display brightness depending up on the power source—On Battery and On AC. The LCD
brightness is independent for battery and AC adapter. It can be set using the slider.
NOTE:
The video setting is visible only when a video card is installed into the system.
Security screen options
Option
Description
Admin Password
Allows you to set, change, or delete the administrator (admin) password.
Default setting: Not set
System Password
Allows you to set, change, or delete the system password.
Default setting: Not set
Strong Password
Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
38
System setup
10 sec—enabled by default
15 sec
30 sec
1 min
5 min
15 min
Never
Enable Camera—enabled by default
Secure Digital (SD) card—enabled by default
Secure Digital (SD) card boot
Secure Digital (SD) card read-only-mode
NOTE:
You must set the admin password before you set the system or hard drive password. Deleting
the admin password automatically deletes the system password and the hard drive password.
NOTE:
Successful password changes take effect immediately.
NOTE:
Successful password changes take effect immediately.
NOTE:
If Strong Password is enabled, the Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
Hide quick links:
Advertisement
Table of Contents
